INFICON Sensistor ILS500F Leak Detection System - Manual (Page 58)

Troubleshooting 58
ninp69e1-a (1410)
START and STOP buttons
This is a “manual” test. The test continues when the correct button is pressed. The test
checks the activated START and STOP buttons only. Use INPUT menu under Service
menu to check buttons that are turned off.
Hardware Test
STOP
Vacuum:
Pressure:
0.00 bar
bar
Press Start Button (Top Right)
0.00
OK?
Hardware Test
STOP
Vacuum:
Pressure:
0.00 bar
bar
Press Stop Button (Bottom Right)
0.00
OK?