INFICON Sensistor ILS500F Leak Detection System - Manual (Page 77)

Technical Data 77
ninp69e1-a (1410)
11.4.3 Input 2 (Optional)
Connector: 5 pin male Weidmüller, Omnimate BL3.5. Mating screw terminal
included.
Purpose: Options port 1. Optional analogue or digital input (not supported by
std software).
Pin Signal Type Load Comment
1 +24 VDC SUPPLY 250 mA Option supply.
2 VIN1 IN -60 mA Voltage input:Digital 24 VDC or
analogue 0-10 VDC.
3 IIN1 IN +/-30 mA Current input: 0-20 mA.
4 COM1 IN -250 mA Signal common (GND).
5 COM/SHLD GND +/-30 mA Shield.
Connector: 5 pin male Weidmüller, Omnimate BL3.5. Mating screw terminal
included.
Purpose: Options port 2. Used for “Active Holder for Hand Probe” (90630).
Pin Signal Type Load Comment
1 +24 VDC SUPPLY 250 mA Option supply.
2 VIN2 IN -60 mA Voltage input:Digital 24 VDC or
analogue 0-10 VDC.
3 IIN2 IN +/-30 mA Current input: 0-20 mA.
4 COM2 IN -250 mA Signal common (GND).
5 COM/SHLD GND +/-30 mA Shield.