INFICON Sensistor ILS500F Leak Detection System - Manual (Page 6)

6
ninp69e1-a (1410)
Failure to observe the following precautions could result in damage to the
equipment:
Warning
Pressurizing objects at too high pressures can lead to the object bursting. This in
turn can result in serious injury or even death. Never pressurize objects that have
not previously been burst-tested or have otherwise been approved for the test
pressure you intend to use.
Caution
If the tracer gas filler suffers external damage, it must be checked and repaired by a
service organization authorized by INFICON.
Caution
Always switch power off before connecting or disconnecting any cable.
Notice Before connecting the tracer gas, confirm that the connectors or test
object is designed for operating at the test pressure to be used.