INFICON Sensistor ILS500F Leak Detection System - Manual (Page 80)

80 Technical Data
ninp69e1-a (1410)
11.4.7 Probe Control Port
11.4.8 Power Input
11.4.9 Safety Interface
4 EVAC1 OUT 0.5 A Venturi valve output.
5 EVAC2 OUT 0.5 A Evacuation valve output.
6 GASFILL OUT 0.5 A Fill valve output.
7 OPTOUT OUT 0.5 A
8 COM GND -1.0 A Common GND for outputs.
Pin Signal Type Load Comment
Connector: 25 pin female D-sub
Purpose: For external connection of ISH2000.
Specification
AC mains voltage
110-240 V 50/60Hz.
AC mains current Typically 1 A (2 A pulse at power on).
Caution
Risk assessment is the sole duty of the user of the ILS500 F
Connector: 6 pin male Weidmüller, Omnimate BL3.5. Mating screw terminal
included.