INFICON SID-242 Thin Film Deposition Controller - Manual (Page 16)

Chapter 2 Quick Start
2-4
Simulate Mode Simulate mode allows you to familiarize yourself with SID-242
operation, and test process recipes. If the first SoftKey is
labeled “START SIMULATE” then the Simulate mode is active.
If the first SoftKey is labeled “START PROCESS" then normal
mode is selected. Use the touchpad to select the Setup menu,
then click System. On the SQM-242 tab, click the Simulate
option button. Click the “Save” SoftKey label, or press the top
SoftKey to activate Simulate mode.