Chapter 3 sqs-242 software – INFICON SID-242 Thin Film Deposition Controller User Manual
Page 38
Chapter 3 SQS-242 Software
3-8
Layer Tab
The layer tab provides the capabilities needed to add and delete process layers, as well
as to edit the film, rate & thickness for each layer. Normally each film in a process is
run sequentially, as layers. Codeposition represents different films that are deposited
concurrently with other films, in the same layer.
Cut Layer: Removes the layer selected in the Layers list box from the process, and
places the layer on the clipboard.
Copy Layer: Places the layer selected in the Layers list box on the clipboard, without
removing it from the process.
Paste Layer: Inserts the clipboard layer above the currently selected layer in the Layers
list box. Existing layers are shifted down.
Paste CoDep: Pastes the clipboard layer as a codeposition layer at the currently
selected layer number. Films that use outputs already assigned to the selected layer
are invalid.