KD Scientific Allegro Peristaltic Pump Series - Manual (Page 12)

12 K
D
S
A
lle
g
ro
P
e
ri
s
ta
lt
ic
P
u
m
p
S
y
s
te
m
U
s
e
r’s
M
a
n
u
a
l
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Product Over view
ALLEGRO PERISTALTIC PUMP SYSTEM TOUCHSCREEN BUTTON REFERENCE
The following buttons are part of the KDS Allegro Peristaltic Pump System software:
Settings: Access the settings menu used to
adjust the following parameters: Audible Alarms,
Pusher Block Force, Display Brightness, etc.
Fast Forward: Rotates in the forward (infuse)
direction (press & hold).
Fast Reverse: Rotates in the reverse (withdraw)
direction (press & hold).
Rate Increase: Increases dispensing rate.
Rate Decrease: Decreases dispensing rate.
Direction (RD): Reverse direction.
Direction (FD): Forward direction.
Accept: Used to accept the parameters/settings on
a screen and return to previous screen in the menu.
Cancel: Used to cancel any changes/entries on a
screen and return to the previous screen in the menu.
Set Delay Parameters: Used to set the time
values for delayed operation. This permits the
pump to start automatically at a preset time
interval.
Set Delay Parameters: Indicates the Delay
Timer has been set. The pump will start
automatically.
Run Preview: Access the Run Preview screen that
shows a summary operating parameters.
Run/Resume: Used to Run or Resume a Program.
Re-Run: Clears counters/timers (except the Total
Infused Volume counter) and runs the selected
program from the beginning.
Stop: Used to stop running a Program.
Reset: Resets all counters/timers.
Minimum Value Allowed: Used to
select minimum value allowed.
Maximum Value Allowed: Used to select
maximum value allowed.
Configure: Used to set up the program.
Back: Used to call the Mode and Programs menu.
Page Down: Used to page down in a display list.
Page Up: Used to page up in a display list.
Line Up: Used to scroll up in a display list.
Line Down: Used to scroll down in a display list.
Insert Step: Used to insert a new Step in a Program
while editing/creating the Program. The new Step is
inserted after the Step that is currently selected.
Delete Step: Used to delete the selected Step in a
Program while editing/creating the Program. To
confirm deletion, you must select the Delete Step
button a second time.
Move Step Up: Moves the currently selected Step
in a Program up one position in the Program Order
(e.g. Step 3 becomes Step 2).
Move Step Down: Moves the currently selected
Step in a Program down one position in the
Program Order (e.g. Step 2 becomes Step 3).
Copy Step: Creates a duplicate (copy) of the
currently selected Step in a Program and inserts it as
the last Step in the Program being created/edited.
Password Protection Off: Indicates that the pump
is currently unlocked. Pressing the button twice locks
the Touchpad.
Password Protection On: Indicates that the pump
is currently locked. Press the button and enter
password to unlock the Touchpad.
File Options: Access the File Options menu that is
used to manage the list of Programs and to export
Program information to an externally linked pump or
to a connected computer.