KD Scientific Allegro Peristaltic Pump Series - Manual (Page 16)

16 K
D
S
A
lle
g
ro
P
e
ri
s
ta
lt
ic
P
u
m
p
S
y
s
te
m
U
s
e
r’s
M
a
n
u
a
l
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Configuring the KDS Allegro Peristaltic Pump System
The KDS Allegro Peristaltic Pump System program is easy
to set up.
The Allegro Peristaltic Pump System is easily
configured. When the unit is powered up, the
Configuration Screen will be displayed.
Configuring the KDS Allegro Peristaltic Pump System
Select Mode
Select Flow Rates
Select Tubing Manufacturer Size
Select Target Volume
Fast Reverse Fast Forward
Preview
Program
Jumps to
Run
Screen
General
Pump
Parameter
Set-Up
Press and hold to activate
Pump Selection
The Allegro Peristaltic pump must be configured to run
with the installed head configuration.
1) Select the Setup button to enter the Set-up
menu.
2) Choose the proper button for your pump type.
Select I for the Allegro I, II for the Allegro II or III
for the Allegro III.
Mode Selection
Select MODE in the Configuration Display menu and the
Mode Selection screen will be displayed.
The available modes are as follows:
Dispense Mode: Dispense mode is the main operating
mode for the Allegro Peristaltic Pump System.
New Program: Program Mode allows the user to create
automatic dispense programs and save them for later
use.
Note: All created programs will be listed in the mode
directory.
Pump Type Selection