KD Scientific Allegro Peristaltic Pump Series - Manual (Page 17)

17 K
D
S
A
lle
g
ro
P
e
ri
s
ta
lt
ic
P
u
m
p
S
y
s
te
m
U
s
e
r’s
M
a
n
u
a
l
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Configuring the KDS Allegro Peristaltic Pump System
Tubing Selection
1. In the Configuration Display select the
Tubing button. The Tubing Selection Screen
will be displayed.
2. The Tubing Selection screen contains a Custom
Tubing and Standard Tubing selection. Press the
Standard Tubing button to select a predefined
tubing size. Use the Line Up/Down and
Page Up/Down buttons to scroll through the
selections. Select the desired tubing and
press Enter. Press
Press
Press to enter the inside
diameter of the tubing
3. For a Custom Tubing size, use this selection.
Custom Tubing Definition Display
Press to enter a
custom tubing
Note: When changing tubing sizes,
please recalibrate the tubing before
using. Please see the Tube Calibration
section of this manual.