KD Scientific Allegro Peristaltic Pump Series - Manual (Page 61)

61 K
D
S
A
lle
g
ro
P
e
ri
s
ta
lt
ic
P
u
m
p
S
y
s
te
m
U
s
e
r’s
M
a
n
u
a
l
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Operating the KDS Allegro Peristaltic Pump System
TVOLUME
Sets or displays the target volume. Configuration Run
screen mode only.
Command format:
tvolume [{target volume} {volume units}]
Query response:
<lf>[##:]Target volume not set<cr>
<lf>[##]<prompt>
or:
<lf>[##:] # xl<cr>
<lf>[##]<prompt>
RVOLUME
Displays the dispensed (reversed) volume.
Configuration Run screen mode only.
Command format:
rvolume
Query response:
<lf>[##:]# xl<cr>
<lf>[##]<prompt>
Time commands
CFTIME
Clears the dispensed (forward) time. Configuration Run
screen mode only.
Command format:
cftime
CTIME
Clears all times. Configuration Run screen mode only.
Command format:
ctime
CTTIME
Clears the target time. Configuration Run screen mode
only.
Command format:
cttime
CRTIME
Clears the dispensed (reversed) time. Configuration
Run screen mode only.
Command format:
crtime
FTIME
Displays the dispensed (forward) time. Configuration Run
screen mode only.
Command format:
ftime
Query response:
<lf>[##:]# seconds<cr>
<lf>[##]<prompt>
or:
<lf>[##:]##:##:##<cr>
<lf>[##]<prompt>
TTIME
Sets or displays the target time. Configuration Run screen
mode only.
Command format:
ttime [{target time}]
Query response:
<lf>[##:]Target time not set<cr>
<lf>[##]<prompt>
or:
<lf>[##:]# seconds<cr>
<lf>[##]<prompt>
or:
<lf>[##:]##:##:##<cr>
<lf>[##]<prompt>
RTIME
Displays the dispensed (reversed) time. Configuration Run
screen mode only.
Command format:
rtime
Query response:
<lf>[##:]# seconds<cr>
<lf>[##]<prompt>
or:
<lf>[##:]##:##:##<cr>
<lf>[##]<prompt>