KD Scientific Allegro Peristaltic Pump Series User Manual
Page 63
63
K
D
S
A
lle
g
ro
P
e
ri
s
ta
lt
ic
P
u
m
p
S
y
s
te
m
U
s
e
r’s
M
a
n
u
a
l
phone
508.429.6809
fax
508.893.0160
web
www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Operating the KDS Allegro Peristaltic Pump System
Run Mode Errors
ERROR 101-
Power to the pump was lost.
ERROR 102-
The A/D convertor is not working.
Set-up Errors
ERROR 201-
Backlight setting out of range, 10 to 100
ERROR 202-
Alarm setting out of range, 1 to 99
ERROR 203-
Force percentage out of range, 1 to 100.
ERROR 204-
Pump address out of range, 0 to 99.
ERROR 205-
Pump number out of range, 1 to 99.
ERROR 207-
Tubing diameter out of range, 0.1 mm to
99 mm.
ERROR 210-
Forward Rate out of range.
ERROR 211-
Reverse rate out of range.
ERROR 212-
Tubing diameter is out of range.
ERROR 213-
Target volume exceeds tubing volume.
ERROR 214-
Target time exceeds tubing volume.
ERROR 215-
Total volume exceeds tubing capacity.
ERROR 216-
Volume is less than the minimum value.
ERROR 217-
Motor has stalled.
ERROR 218-
Program needs a rate.
ERROR 219-
Program needs infuse and withdraw rates
and a target volume.
Program Errors
ERROR 301-
Delay time out of range, must be at least
0.20 seconds.
ERROR 302-
Number of steps must be between 2 and
500.
ERROR 306-
Download to remote pump incomplete.
ERROR 307-
Tubing size and flow rate not
compatible, cannot set motor speed.
ERROR 308-
File exists.
ERROR 310-
Not all fields have been set.
ERROR 311-
Rate is out of range.
ERROR 312-
Time is out of range.
ERROR 313-
Volume is out of range.
ERROR 314-
First rate is out of range.
ERROR 315-
Second rate is out of range.
ERROR 316-
First time is out of range.
ERROR 317-
Second time is out of range.
ERROR 318-
First volume is out of range.
ERROR 319-
Second volume is out of range.
ERROR 320-
The pulse count is 0.
ERROR 321-
Bad memory sector in step #%d. Step
was deleted.
ERROR 322-
Volume exceeds tubing capacity
in step #%d.
ERROR 323-
Incompatible rate vs. tubing size in step
#%d.
ERROR 324-
Repeat count is 0.
✐
NOTE: Error and Alarm text are shown in a
yellow box whereas Notice, Confirm and
Verified are shown in a green box.
Run Mode Errors:
Error 1XX
Set-up Errors:
Error 2XX
Program Errors:
Error 3XX
Critical Errors:
Error 4XX
ERROR CODES