Kinze 3660 Lift and Rotate Planter Rev. 7/14 - Manual (Page 115)

TM
Model 3660 M0217-01
Rev. 7/11 5-35
Lubrication and Maintenance
4. Measure 67" from left side of inner hitch along
lower frame member of center frame; place
reference mark with an appropriate marker.
Repeat on right side.
5. Measure width of inner hitch, divide value by 2,
measure from one side of hitch, and place a
centerline reference mark at that point on upper
hitch cross member.
6. Measure from centerline to each of the reference
marks on center frame (Y"). If measurements are
NOT equal go to next step. If measurements are
equal skip to Step 8.
7. Rotate center post or push on end of planter
frame with shorter distance. Re-measure from
centerline to reference marks. Repeat until
measurements are equal.
67'' 67''
Y'' Y''
Field stabilizer
INSTALL ROTATION STOP bLOCK
1. Raise planter to transport position and install
safety lockup.
2. Measure distance between stop mount on inner
hitch and stop surface on center post. Include stop
tap block to determine required combination of
shims to completely fill this space. Tolerance for
filling the space is +1∕16"/-0".
8. Tighten field stabilizer fasteners when
measurements are equal on both sides of
planter.
Stop block measurement