Kinze 3660 Lift and Rotate Planter Rev. 7/14 - Manual (Page 52)

M0217-01 Model 3660
3-8 Rev. 7/11
TM
Row Unit Operation
INTERPLANT PUSH ROW UNIT VACUUM HOSE SHUTOFF
When push row units are not used, move row unit end of 2" vacuum hose on each push row unit to storage mount
located on side of shank except for center push row unit as shown below at right.
Storage mount
Interplant vacuum hose shutoff
INTERPLANT PUSH ROW UNIT CLUTCH SPROCKET
Push row unit clutch sprocket disengages interplant
drive from push row unit drill shaft when only pull row
units are used.
DISENGAGE
Rotate knurled collar ¼ turn. Rock drill shaft slightly
using a ⅞" wrench to take pressure off of spring
loaded pins in clutch to allow pins to “pop” out,
disengaging drive.
ENGAGE
Rotate knurled collar ¼ turn and turn drill shaft with a
⅞
" wrench until drive pins engage drive sprocket.
Interplant clutch sprocket
Center push row vacuum hose storage mount
Storage mount