Kinze 3660 Lift and Rotate Planter Rev. 7/14 - Manual (Page 83)

TM
Model 3660 M0217-01
Rev. 7/11 5-3
Lubrication and Maintenance
bUSHINGS
Lubricate bushings at frequency indicated.
Check each bolt for proper torque. If bolt is loose, removed it and inspect bushing for cracks and wear. Replace
bushing if necessary. Use
only hardened flat washers. Replace damaged flat washers with proper part. Torque
hardware to 130 ft-lb (176.2 N-m).
Pull/push row unit parallel linkages (8 per row)
Row unit “v” closing wheel, covering discs/
single press wheel and/or drag closing wheel
eccentric bushings (2 per row) bed leveler parallel linkages (6 per row)
Interplant push row unit lockups - 2 per row
Row unit mounted disc furrower parallel
linkages (6 per row)