Kinze 3660 Lift and Rotate Planter Rev. 7/14 - Manual (Page 27)

TM
Model 3660 M0217-01
Rev. 9/11 2-15
Machine Operation
SUMMARIzED FIELD TO TRANSPORT SEqUENCE
1. Install row marker lockups.
2. Raise planter using field lift.
3. Extend tongue.
4. Engage wing locks.
5. Lower planter to ground.
6. Raise planter on center post.
7. Rotate planter to transport position.
8. Install safety lockup.
9. Install hitch safety pin.
10. Install transport latch locking pin.
NOTE: Read following information for detailed instructions.
FIELD TO TRANSPORT SEqUENCE
Position planter in a relatively flat area. Avoid areas with furrows, etc.
1. Install row marker lockups.
Row marker lockup
2. Start tractor. Operate hydraulic control to raise
planter using field lift.
3. Hold rotate/tongue switch to TONGUE and operate
hydraulic control to fully extend tongue. Tongue
latch automatically engages.
Field lift/tongue extension