Kinze 3660 Lift and Rotate Planter Rev. 7/14 - Manual (Page 64)

M0217-01 Model 3660
3-20 Rev. 7/11
TM
Row Unit Operation
Disc furrowers are used to clear crop residue, dirt clods, and dry soil from in front of row units for a clean and smooth
seed bed. The disc furrower may be equipped with 12" solid blades or 12" notched blades. Notched blades are for
heavier residue conditions and cut crop residue and move it aside to prevent plugging or pushing.
ROW UNIT MOUNTED DISC FURROWER (PULL ROW)
Vertical adjustment can be made in ⅓" increments. Remove lynch pin in vertical support arm and move arm up or
down. Reinstall lynch pin. Finer adjustment can be made by removing lynch pin and using ⅝" x 2¼" set screw to
clamp support arm in position. Slotted holes in support arm allow front to rear disc blade adjustment. Blades can be
adjusted so front edges meet or cutting edge of one blade overlaps edge of other blade.
NOTE: Dust cap must be removed to make adjustments.
ROW UNIT MOUNTED bED LEVELER (PULL ROW)
NOTE: Row unit mounted bed leveler is not compatible
with row spacings less than 36".
Vertical adjustment can be made in ⅓" increments. Remove
lynch pin in vertical support arm and move arm up or down.
Reinstall lynch pin. Finer adjustment can be made by removing
lynch pin and using ⅝" x 2¼" set screw to clamp support arm
in position.
Slotted holes in support arm allow blade adjustment. Blades
can be tilted up or down.
Slotted holes
Dust cap
Disc furrower adjustment
Slotted
holes behind
blades
in support
arm.
bed leveler adjustment
Set screw
Lynch
pin
Set screw
Lynch pin