Kinze 3660 Lift and Rotate Planter Rev. 7/14 - Manual (Page 25)

TM
Model 3660 M0217-01
Rev. 9/11 2-13
Machine Operation
3. Remove safety lockup from center lift cylinder and place in storage location on hose take-up.
4. Start up tractor. Hold rotate/tongue switch
to ROTATE and operate hydraulic control to
rotate planter to field position. Transport latch will
automatically release.
NOTE: Center post lift is used only for folding or
unfolding planter. Raising and lowering planter
during field operation is performed using field lift
(axle rockshaft).
5. Hold raise/wing lock switch to RAISE and operate
hydraulic control to fully lower planter on center
post.
7. Hold raise/wing lock switch to WING LOCK and
operate hydraulic control to release wing locks.
Wing lock release
Planter in field lift position
Safety lockup in storage position Safety lockup in transport position
6. Operate hydraulic control to raise planter using field lift.