Kinze 3660 Lift and Rotate Planter Rev. 7/14 - Manual (Page 85)

TM
Model 3660 M0217-01
Rev. 8/12 5-5
Lubrication and Maintenance
PTO PUMP SHAFT COUPLING (TRACTOR DRIVEN PTO PUMP AND OIL COOLER OPTION)
NOTE: Clean and grease PTO shaft coupling each time
pump is installed.
NOTE: Apply coating of high-speed industrial coupling
grease, such as Chevron Coupling Grease meeting AGMA
CG-1 and CG-2 Standards, to extend shaft spline life.
Chevron ® trademark is owned by Chevron Products Company.
AGMA is the acronym for the American Gear Manufacturers
Association.
1⅜"-21 spline PTO pump shown
PLANTER MOUNTED PTO PUMP DRIVELINE
NOTICE
Lubricate every 8 hours or equipment failure can occur.
Planter mounted PTO shaft -
Lubricate every 8 hours
Visually inspect all wear surfaces inside double yoke to insure presence of grease after lubricating.
Prior to 2013 production 2013 production and on
* Lubricate ball, socket and inner cross kit with at least
15 pumps of grease, or until purged.
** Lubricate double yoke and all other areas with at least
10 pumps of grease, or until purged.
* Lubricate ball, socket and inner cross kit with at least
15 pumps of grease.
** Lubricate outer cross kit and all other areas with at
least 5 pumps of grease.
** **
**
** **
** **
*
* Slide cover to access
grease fitting