Leica Biosystems CM1860/CM1860 UV - Manual (Page 9)

9 Leica CM1860/CM1860UV – Cryostat
2. Safety
2.1 Safety notes
These Instructions for Use include important in-
structions and information related to the operating
safety and maintenance of the instrument.
The Instructions for Use are an important part of
the product, and must be read carefully prior to
startup and use and must always be kept near the
instrument.
This instrument has been built and tested in accor-
dance with the safety requirements for electrical
equipment for measurement, control, and labora-
tory use.
Residual risks
The instrument has been designed and constructed
with the latest state-of-the-art technology and
The safety and caution notes in this chapter must be observed at all times.
Be sure to read these notes even if you are already familiar with the operation and use of other
Leica products.
The protective devices on both instrument and components must neither be removed nor modi-
fied. Only service personnel qualified by Leica may repair the instrument and access the instru-
ment's internal components.
2.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis for
accident prevention. Operating the instrument safely is, above all, the responsibility of the owner,
as well as the designated personnel who operate, service or repair the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following
instructions and warnings.
These Instructions for Use must be appropriately supplemented as required by the existing
regulations on accident prevention and environmental safety in the operator's country.
For the CE certificate and up-to-
date certificates pertaining to UV
disinfection, visit us online at:
www.LeicaBiosystems.com
according to recognized standards and regula-
tions with regard to safety technology. Operating
or handling the instrument incorrectly can place
the user or other personnel at risk of injury or can
cause damage to the instrument or other property.
The machine may be used only as intended and
only if all of its safety features are in proper working
condition. Malfunctions that impede safety must be
remedied immediately.
To maintain this condition and ensure safe opera-
tion, the user must observe all notes and warnings
contained in these Instructions for Use.
Only original spare parts and permitted original
accessories may be used.