Leica Biosystems ASP200 S - Manual (Page 29)

29 Leica ASP200 S
4. Instrument Setup
Fig. 9
Printer (optional)
• Swing the door of the instrument console (6)
upwards.
• Connect the printer to the printer port (8) using
a Centronics standard cable.
( Fig. 9 )
• Your Leica dealer can recommend a suitable
printer.
• If compliance with the electromagnetic inter-
ference standards is of fundamental impor-
tance, a specially shielded printer cable must
be used.
Other terminals
• For data transfer and storage, the instrument
console has a regular 1.44 MB floppy drive
(11) for 3.5" diskettes and a serial (RS 232)
interface (12).
6
10
9
8
11
12
4.4 Making the data connections