Leica Biosystems ASP200 S - Manual (Page 36)

36 Instructions for Use V 1.4, RevE – 03/2013
4.10 Switching off the instrument
If the instrument must be completely switched off or disconnected from the
power supply, please proceed as follows:
• Press MENU to switch to the MENU FUNCTIONS window.
• Press the EXIT APPLICATION button there.
A message appears stating that all data has been stored and the system is
being shut down.
Once all data has been stored, the following message appears:
You can now switch off the instrument with the ON/STOP switch on the
right of the instrument and with the ON/OFF switch on the rear panel of the
instrument ( Fig. 4, 42).
Pressing the RESTART key restarts the instrument.
4. Initial Operation
Fig. 21
Fig. 20
Notice!
The instrument is allowed to be switched off completely in this
way only. Otherwise, severe damage to the instrument's hardware
and loss of data can occur.