Lenze E84DGFCA - Manual (Page 15)

Lenze · Decentralised frequency inverter 8400 motec (AS-Interface option) · EDS84DMOTASI EN 4.0 - 09/2013
15
Product description
Connections and interfaces
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• By default, the AS-i terminal and the LEDs for the AS-i status displays are already mounted and
wired:
• AS-i connection to terminal strip X3
• LEDs on plug connector X55
• The positions A1 ... A4 and B1 ... B4 serve to freely connect the AS-i terminals, the LEDs for the
AS-i status displays and other connections (e.g. digital inputs).
• For the connections, 5-pin M12 connectors or - alternatively - cable glands (cable cross-section
max. 1.0 mm
2
, AWG 18) can be used.
• The M12 connectors, cable glands and prefabricated system cables can be obtained from
various manufacturers.
• Wire the M12 plugs or cable glands used with the corresponding contacts of the terminal strips
X3, X4 and X61.

"Inverter Drives 8400 motec" hardware manual
Observe the notes and wiring instructions contained in this documentation.