Lenze E84DGFCA - Manual (Page 60)

Parameter reference
Communication-relevant parameters of the operating system
60
Lenze · Decentralised frequency inverter 8400 motec (AS-Interface option) · EDS84DMOTASI EN 4.0 - 09/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 Parameter reference
This chapter supplements the parameter list and the table of attributes in the software manual and
in the »Engineer« online help for the Inverter Drive 8400 motec by the parameters for AS-i
communication.
12.1 Communication-relevant parameters of the operating system
This chapter lists the communication-relevant parameters of the 8400 motec operating system in
numerically ascending order.
C01501
C01503

Software manual/»Engineer« online help "Inverter Drive 8400 motec"
Here you will find general information on parameters.
Parameter | Name:
C01501 | Response in case of communication fault with MCI
Data type: UNSIGNED_8
Index: 23074 = 0x5A22
Setting the response to a communication fault or an incompatible communication unit
Selection list
0 No response
1 Fault
4 Warning Locked
Subcodes Lenze setting Info
C01501/1 1: No response Resp. to MCI fault 1
• Response to a communication fault.
C01501/2 1: No response Resp. to MCI fault 2
• Response to an incompatible communication unit.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01503 | MCI timeout
Data type: UNSIGNED_16
Index: 23072 = 0x5A20
Setting range (min. value | unit | max. value)
0 ms 1000
Subcodes Lenze setting Info
C01503/1 200 ms MCI timeout
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1