5 special notes for 821x, 822x, 824x controllers, 6 special notes when using 8200 vector controllers, Parameter setting – Lenze EMF2102IB User Manual
Page 30
![background image](/manuals/565908/30/background.png)
Parameter setting
6-6
L
BA2102EN
6.5
Special notes for 821X, 822X, 824X controllers
Relative setpoint selection C0127 (process and parameter channel)
•
Absolute setpoint selection
A setpoint is input as absolute Hz value via the process and the parameter channel:
Process channel:
Setpoint absolute ±24000
≙
480 Hz
Parameter channel:
C046
absolute in Hz
C141
no influence
•
Normalized setpoint selection
A setpoint is input as absolute C0011 value via the process and parameter channel:
Process channel:
Setpoint absolute ±2
14
≙
C011 (fd
max
)
Parameter channel:
C046
only display absolute in Hz
C141
±100.00%
≙
C011 (fd
max
)
Code
Name
Note
C0127
Frequency setpoint selection format
(P2102)
0
Absolute setpoint selection
1
Normalized setpoint selection
LECOM format: VD
6.6
Special notes when using 8200 vector controllers
The digital and analog input and output signals can be configured freely (see Operating Instructions
vector; codes C0410, C0412, C0417 and C0421).
Show/Hide Bookmarks