Lenze EMF2102IB - Manual (Page 59)

Contents
8-27
L
BA2102EN
8.6 Index
A
Accessories, 8-1
for a host, 8-1
for optical fibres (LECOM-LI), 8-2
for RS232 (LECOM-A), 8-1
for RS485 (LECOM-B), 8-2
Acknowledgement, 8-20
negative, 7-1
positive, 7-1
TRIP reset, 6-5
Addressing
Code bank addressing, 8-17
Extended addressing, 8-18
Standard addressing, 8-16
Via input selection, 8-17
Appendix, 8-1
Application as directed, 1-2
Application conditions, 3-1
B
Basic insulation, 4-4
Baud rate, 3-1, 5-1
See Baud rate
BCC, 8-20
Block-check character, 8-20
BROADCAST, 8-24
Example, 8-24
C
Cable, Optical fibre, 4-9
Character format, 3-1
Code bank, 8-14, 8-17
Code table, 8-3
Commissioning, 5-1
Communication media, 3-1, 3-2
Communication monitoring, 6-4
Communication times, 3-3
Connection
9-pole SubD female plug, 4-2
Connections of the fieldbus module, 4-1
Plug-in terminal (2-pole), 4-2
Plug-in terminal (4-pole), 4-2
Control word, 6-2, 8-5, 8-6, 8-7, 8-8, 8-9, 8-10
Controller
Application as directed, 1-2
Group formation, 6-3
Labelling, 1-2
Controller address, 5-1, 6-3, 8-3, 8-20
Controller inhibit, 6-2, 6-5, 8-3
Current consumption, 3-2
D
Dimensions, 3-2
E
Electrical data. See Ratings
Electrical installation, 4-3
Electrical isolation, 4-4
Extended addressing, 8-18
External supply, 3-2
F
Fault elimination, 7-1
Fault memory, 8-11
Fault numbers, 8-15
Frequency setpoint, 6-2, 8-3
Show/Hide Bookmarks