Lenze EMF2102IB - Manual (Page 6)

Preface and general information
1-2
L
_^ONMObk
1.2.1 Legal regulations
Labelling Nameplate CE identification Manufacturer Labelling
Lenze 2102 fieldbus modules are
unambiguously identified by their nameplates. In compliance with to the EC Low Voltage
Directive Lenze Drive Systems GmbH
Postfach 10 13 52
D-31763 Hameln
Application as
directed
2102 fieldbus module
• Operate the fieldbus module only under the conditions prescribed in these Operating Instructions.
• The fieldbus module is an additional module and can be optionally attached to the Lenze controller series 820X, 821X, 822X, 8200 vector
and 93XX. The 2102 fieldbus module links these Lenze controllers to superimposed hosts (PLC or PC) using the Lenze LECOM A/B/LI
fieldbuses.
• The fieldbus module must be attached and electrically connected so that it complies with its function and does not cause any hazards when
attached and operated as instructed.
• Observe all notes given in chapter “Safety information“ ( ^ 2-1).
• Please observe all information given in these Operating Instructions. This means:
– Read these Operating Instructions carefully before you start to work with the system.
– These Operating Instructions must always be available during operation of the fieldbus module.
Any other use shall be deemed inappropriate!
Liability • The information, data, and notes in these instructions met the state of the art at the time of printing. Claims referring to drive systems
which have already been supplied cannot be derived from the information, illustrations, and descriptions given in these Operating
Instructions.
• The specifications, processes, and circuitry described in these Operating Instructions are for guidance only and must be adapted to your
own specific application. Lenze does not take responsibility for the suitability of the process and circuit proposals.
• The indications given in these Operating Instructions describe the features of the product without warranting them.
• Lenze does not accept any liability for damage and operating interference caused by:
– disregarding these Instructions
– unauthorized modifications to the controller
– operating faults
– improper working on and with the controller
Warranty • Warranty conditions: see Sales and Delivery Conditions of Lenze Drive Systems GmbH.
• Warranty claims must be made immediately after detecting defects or faults.
• The warranty is void in all cases where liability claims cannot be made.
Disposal Material recycle dispose Disposal
Metal D -
Plastic D -
Printed-board assemblies - D
Operating Instructions D
Show/Hide Bookmarks