Lenze EMF2102IB - Manual (Page 9)

Technical data
3-1
L
_^ONMObk
3 Technical data
3.1 Features of the 2102 fieldbus module
The 2102 fieldbus module has the following features:
•
Different communication media:
– RS232 (LECOM-A)
– RS485 (LECOM-B)
– Optical fibre (LECOM-LI)
•
LECOM protocol V2.0
•
The baud rate can be set to 1200, 2400, 4800, 9600 or 19200 baud (bit/s).
•
Parameter setting via controller code numbers
•
3 Diagnostic LEDs
•
Electrical isolation between control stage and power stage
•
Electrical isolation of the I/O terminals of 821X, 8200 vector, 822X and 93XX
•
Easy installation
3.2 General data and application conditions
Field Values
Communication media RS232 (LECOM-A): copper conductor
RS485 (LECOM-B): copper conductor
(LECOM-LI): optical fibre
Protocol LECOM-A/B V2.0
Character
Format 7 bit ASCII
1 Stop bit
1 Start bit
1 Parity bit (even)
Baud rate [bits/s] 1200, 2400, 4800, 9600, 19200
Ambient temperature During operation: 0 to +50 °C
Transport: –25 to +70 °C
Storage: –25 to +55 °C
Permissible moisture Class 3K3 to EN 50178 (without condensation, average relative humidity 85%)
24-V-DC-
Voltage supply • 820X / 8200 vector (observe chapter 4.3): only external supply
• 821X / 822X / 8200 vector (observe chapter 4.3) / 93XX: internal or external supply
Show/Hide Bookmarks