Lenze EMF2180IB - Manual (Page 12)

3 Product description
3.1 Application as directed
12
Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.0 EN · 07/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Product description
3.1 Application as directed
The communication module ...
• by remote maintenance is used for parameterisation or programming, commissioning and
diagnostics of the applicable Lenze devices;
• is suitable for the transmission of IEC61131 programs, application data (such as profile data)
and parameter data;
• is a device intended for use in industrial power systems;
• should only be used under the operating conditions prescribed in this documentation.
Any other use shall be deemed inappropriate!
Application range
The communication module can be used with the following Lenze devices:
• Servo Drives 9400
• 9300 servo inverter
• 9300 vector
• 9300 Servo PLC
• ECS servo system
• 8200 motec motor inverter
• 8200 vector frequency inverter
• Drive PLC
• 82XX frequency inverter
• starttec motor starter
• Terminal extension 9374
• Control / display unit (EPM-HXXX)
• I/O system IP20 (EPM-TXXX)