Lenze EMF2180IB - Manual (Page 56)

9 Parameter reference
56
Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.0 EN · 07/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C0358
Parameter | Name:
C0358 | CAN reset node
Data type: INTEGER_32
Index: 24217 = 5E99
After a reset any changes to communication parameters such as baud rate or node address are applied.
A "Reset node" can be activated by:...
• reconnection of the mains;
• a "Reset node" via the bus system;
• a "Reset node" via code C0358.
Selection list (Lenze setting printed in bold)
0 No function
1 CAN reset
 Read access  Write access  CINH  PLC STOP  No transfer