Lenze EMF2180IB - Manual (Page 50)

8 Diagnostics
8.1 Error: Cause and remedy
50
Lenze · EMF2180IB communication module (EthernetCAN) · Communication Manual · DMS 5.0 EN · 07/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8 Diagnostics
8.1 Error: Cause and remedy
8.2 LED status displays for the communication module and for CAN communication
[8-1] LED status displays for the communication module and for CAN communication
Diagnostics Possible cause of error Remedy
Power LED (P) is not on. The device is not switched on. Check external voltage supply
Error LED (E) is on or blinking. CAN bus error Check CAN wiring.
Link LED is not on. Ethernet wiring error Check Ethernet wiring.
2180FEW001D
LED Colour Status Description
B Yellow off Ethernet baud rate: 10 Mbps
on
Ethernet baud rate: 100 Mbps
blinking
The IP address is not assigned yet; it is currently being identified.