Lenze IMSS500+ Simple Servo 500 600 i1000 - Manual (Page 25)

SimpleServo 500/600/i1000 User Manual Rev 3.4
5.1.5 TB505 - Serial Communications Port
TB505 is a 9-pin D-sub connector that is used to communicate with a host computer via standard RS232
interface. This port is present on all SimpleServo drives. All levels must be RS-232C compliant.
TB505 Pin Assignments (all models)
"D"-Sub Pin # Name Function
1 Reserved
2 TX RS232 TX
3 RX RS232 RX
4 Reserved
5 GND Common
6 Reserved
7 Reserved
8 Reserved
9 Reserved
WARNING!
Do not make any connection to Reserved pins!
Note
If you purchase serial cables from a third party, you must use a pass-through cable, not Null-
Modem (not crossover).
25