Lenze IMSS500+ Simple Servo 500 600 i1000 - Manual (Page 38)

SimpleServo 500/600/i1000 User Manual Rev 3.4
5.7 Motor Selection
SimpleServo drives are compatible with many servo motors, both AC Technology Corporation motors
and motors from the other manufacturers. We have tested many motors with the SimpleServo and put
their parameters in a database for customer convenience. If you opted for the motor which is in the
database you do not need to provide any motor data to set up motor for the use. However if your
motor is not in the database you can still use it but need to provide some electrical and mechanical
data to make a custom motor profile. The auto-phasing feature of SimpleServo allows you to correctly
determine relation between phase voltage and hall sensor signals, eliminating the need to use a multi-
channel oscilloscope.
5.7.1 Setting Up motor
MotionView Motor Group on the left tree shows currently selected motor. You can click “CLICK HERE
TO CHANGE” to view selected motor parameters or select new motor.
MotionView’s <Motor Group> folder and its contents
Note
If drive is ENABLED, a new motor cannot be set. You can only set a new motor when the
drive is DISABLED.
38