Lenze IMSS500+ Simple Servo 500 600 i1000 - Manual (Page 8)

SimpleServo 500/600/i1000 User Manual Rev 3.4
2 Specifications
2.1 Electrical Characteristics
Drive
Maximum
Continuous
Current (AC in)
Continuous
Phase
Current
(AC Amps)
Peak*
Current
(AC Amps)
Input Voltage
(±10%, 50-60 Hz)
(VAC)
SSX04 6A 4 8 90 – 240
SSX08 12A 8 14 90 – 240
SSX10 15A 10 20 90 – 240
SSX12-3P 19A 12 20 90 – 240
Notes:
“-3P” = 3-phase input power models
* Phase RMS current. Peak current allowed for up to 2 Sec.
Applies to all models:
AC Output Voltage Range (Sinusoidal, Three-Phase)
0–240 VAC RMS
Minimum Output Voltage Range 0 – 340 VAC
Acceleration Time Range (Zero to Max Speed) 0.1 – 5000000 Rpm/sec
Deceleration Time Range (Max Speed to Zero) 0.1 – 5000000 Rpm/sec
Speed Regulation (typical) ± 1 RPM
Input Impedance (+REF to COM and +REF to -REF) 47 kohms
Power Device Switching Frequency (sinusoidal commutation) 16 kHz
Encoder power supply (max) +5 VDC @ 300 mA
Maximum encoder feedback frequency 2.1 MHz
2.2 Environment
Vibration
SS500 Series 0.1 G (all frequencies)
SS600 and SS1000 Series 0.5G max (20 – 50 Hz)
0.1G max (>50 Hz)
Ambient Operating Temperature Range 0 to 40ºC
Ambient Storage Temperature Range -10 to 70ºC
Humidity 5 – 90% non-condensing
Altitude 1500 m/5000 ft (derate by 1% per 300m
(1000 ft) above 1500m (5000 ft))
8