Brady X-Plus II - Manual (Page 103)

93 Print Modes and Options
Print Modes
1/11/07 X-Plus II User Guide 14068L-001 Rev. A
Load Media in Peel-Off Mode
Peel-Off mode ( Figure 27 ) advances one label at a time. The printer does not print another
label until the first label is removed. The TAKE LABEL light flashes until the label is removed.
The backing is wound on the rewind spindle, but the rewind plate is not used.
Figure 27 • Media Loaded in Peel-Off Mode
1
Printhead-open lever
2
Media guide
3
Media guide roller
4
Media supply guide
5
Media
6
Media supply hanger
7
Guide plate
8
Spindle hook
9
Rewind spindle
10
Label backing
11
Rewind plate (removed)*
12
Tear-off bar
13
Printed label
* In new printers, remove the protective plastic covering from the rewind plate
before using.
1 2 4 5
9 8 7
11
12
13
6
10
2 3