Brady X-Plus II - Manual (Page 129)

119 Print Modes and Options
Print Modes
1/11/07 X-Plus II User Guide 14068L-001 Rev. A
Install the Rewind Plate
To install the rewind plate, complete these steps:
1. Remove the rewind plate from its storage location inside the printer.
2. See Figure 31 . Position the rewind plate so that the lip on the attached hook plate points
down.
Figure 31 • Rewind Plate
3. Insert the hook plate lip 1/2 in. (13 mm) into the lower slot in the side plate.
4. Align the upper end of the rewind plate with the matching upper slot in the side plate.
5. Slide in the rewind plate until it stops against the printer’s main frame.
1
Upper slot
2
Lower slot
3
Rewind plate
4
Lip
5
Adjustable hook plate
3
4 2
5
1