Brady X-Plus II - Manual (Page 56)

Operations
Load Ribbon 46
14068L-001 Rev. A X-Plus II User Guide 1/11/07
12. Push down the printhead assembly (
1
), and then rotate the printhead-open lever (
2
)
clockwise until it locks into place.
Remove Used Ribbon
Remove used ribbon from the ribbon take-up spindle each time you change the roll of ribbon.
To remove used ribbon, complete these steps:
1. Has the ribbon run out?
1 2
If the ribbon... Then
Ran out Continue with the next step.
Did not run out Cut or break the ribbon before the ribbon take-up spindle.