Brady X-Plus II - Manual (Page 182)

Data Ports
Applicator Interface Connector 172
14178L-001 Rev. A T408M/T408M-R User Guide 1/11/07
13 RIBBON OUT Output Asserted LOW while there is no ribbon in the printer.
14 DATA READY Output See Applicator Signals on page 168 for more information
about this signal.
• Asserted LOW when sufficient data has been received
to begin printing the next label.
• Deasserted HIGH whenever printing stops after the
current label, due to either a pause condition or the
absence of a label format.
Table 20 • Applicator Interface Connector Pin Configuration (Continued)
Pin
No.
Signal Name Signal Type Description