Brady X-Plus II - Manual (Page 71)

61 Configuration
Print a Configuration Label
1/11/07 X-Plus II User Guide 14068L-001 Rev. A
Print a Configuration Label
A configuration label lists the printer settings that are stored in configuration memory. After
you load the media and ribbon (if necessary), print a configuration label as a record of your
printer’s current settings. Keep the label to use when troubleshooting printing problems.
To print a configuration label, complete these steps:
1. On the control panel, press SETUP/EXIT .
2. Press NEXT/SAVE or PREVIOUS to scroll through the parameters until you reach
LIST SETUP .
3. Press the right oval to confirm printing.
A configuration label prints ( Figure 22 ).
Figure 22 • Configuration Label