Lower media sensor – Brady X-Plus II User Manual
Page 62
Advertising
Operations
Adjust Media Sensors
52
14068L-001 Rev. A
X-Plus II User Guide
1/11/07
Lower Media Sensor
To adjust the lower media sensor, complete these steps:
1.
Locate the lower media sensor assembly under the rear roller (
). The sensor is a
spring clip holding a circuit board.
Figure 21 • Lower Media Sensor Location
2.
Slide the lower sensor until it is under the upper media sensor. Gently pull wires out as
needed (wires should have a little slack).
1
Lower media sensor
1
Advertising