Brady X-Plus II - Manual (Page 86)

Configuration
Control Panel Parameters 76
14068L-001 Rev. A X-Plus II User Guide 1/11/07
Print Sensor Profile
A sensor profile shows sensor settings compared to actual sensor readings.
This label (which will extend across several actual labels or tags) can be
used to troubleshoot printing problems. To interpret the results of the
sensor profile, see
Sensor Profile on page 160 .
Figure 26 • Sensor Profile
To print a sensor profile:
1. Press the right oval to start this standard calibration procedure and print
a media sensor profile.
2. If the sensitivity of the sensors must be adjusted, perform Calibrate
Media and Ribbon Sensor Sensitivity on page 77 .
Table 9 • Printer Parameters (Sheet 13 of 26)
Parameter Action/Explanation
SENSOR PROFILE
PRINT