Brady X-Plus II - Manual (Page 48)

Operations
Load Media in Tear-Off Mode 38
14068L-001 Rev. A X-Plus II User Guide 1/11/07
7. If your printer includes a media dancer assembly (
1
), thread the media under the media
dancer assembly roller. For all printers, thread the media under the media guide roller (
2
)
and then the upper media sensor (
3
).
8. Push the media forward until it passes under the printhead assembly (
1
), under the
snap plate (
2
), and then over the platen roller (
3
).
Important • Make sure that you thread the media under these components. If you thread
the media over the them, the media obstructs the ribbon sensor and causes a false
RIBBON OUT error.
2
3
1
1
3
2