Print a network configuration label – Brady X-Plus II User Manual
Page 72
Configuration
Print a Network Configuration Label
62
14068L-001 Rev. A
X-Plus II User Guide
1/11/07
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the printer is
connected to the network.
To print a network configuration label, complete these steps:
1.
On the control panel, press
SETUP/EXIT
.
2.
Press
NEXT/SAVE
or
PREVIOUS
to scroll through the parameters until you reach
LIST NETWORK
.
3.
Press the right oval to confirm printing.
A network configuration label prints (
). An asterisk designates whether the
wired or wireless print server is active. If no wireless print server is installed, the wireless
portion of the label does not print.
Figure 23 • Network Configuration Label (With a Wireless Print Server Installed)