Brady X-Plus II - Manual (Page 145)

135 Routine Maintenance
Replace the Fuse (360X-Plus II Only)
1/11/07 X-Plus II User Guide 14068L-001 Rev. A
Figure 37 • Fuse Locations
3. Snap the fuse holder back into the AC power entry module.
4. Reconnect the power cord, and turn the printer on (I).
1
In-circuit fuse
2
Fuse holder
3
Spare fuse
Note • If the printer does not power on, an internal component failure may have occurred,
and the printer requires servicing by an authorized service technician.
1
2
3