Brady X-Plus II User Manual

Page 79

Advertising
background image

69

Configuration

Control Panel Parameters

1/11/07

X-Plus II User Guide

14068L-001 Rev. A

Set Early Warning for Media
When this parameter is enabled, the printer provides warnings when labels
are running low.

Note •

Update the number of labels per roll when beginning use of

the Early Warning System. The printer does not make any
adjustments when power is turned off and on.

Default: MEDIA DISABLED

Selections: MEDIA DISABLED, MEDIA ENABLED

To change the Early Warning settings:

1.

When the LCD displays

EARLY WARNING MEDIA

, press the left or

right oval to toggle between

ENABLED

and

DISABLED

. (If you are

prompted for a password, enter your password using the instructions in

Change Password-Protected Parameters on page 60

.)

2.

If you enable the Early Warning System, do the following:

a.

Exit Setup mode and save changes to enable additional parameters.

b.

Enter Setup mode again. The media and ribbon parameters
(

LABELS PER ROLL

,

MEDIA REPLACED

,

RIBBON

LENGTH

, and

RIBBON REPLACED

) appear.

c.

Adjust the settings as necessary (descriptions of each of these
parameters follows).

Set Number of Labels Per Roll for Early Warning
This parameter appears only when Early Warning for Media is enabled.
This value should correspond to the number of labels per roll of the media
that you are using.

Default: 0900

Range: 100 to 9999

To change the value shown:

1.

Press the left oval to move the cursor.

2.

Press the right oval to increase the value of the digit.

Based on the number entered, when the printer detects that less than
15% of the labels remain,

WARNING MEDIA LOW

appears on the

LCD. If the alert function is enabled, the printer generates an alert.
When the printhead is opened and then closed after a media warning is
received, the LCD prompts with

MEDIA REPLACED?

.

3.

If you replaced the media, press the right oval to select

YES

to clear

the warning and reset the label counter. If you did not replace the
media, press the left oval to select

NO

.

Table 9 • Printer Parameters (Sheet 6 of 26)

Parameter

Action/Explanation

EARLY WARNING

MEDIA DISABLED

LABELS PER ROLL
- 0900 +

Advertising