Brady X-Plus II - Manual (Page 42)

Operations
Prepare the Media for Loading 32
14068L-001 Rev. A X-Plus II User Guide 1/11/07
Prepare the Media for Loading
You can use roll media or fanfold media in your printer. Roll media hangs on and is loaded
from the media supply spindle. Fanfold media is stored away from or in the bottom of the
printer and can drape across the media supply spindle.
Roll Media
To place roll media on the media supply hanger, complete these steps:
1. Place the roll of media on the media supply spindle. Push the roll back as far as it will go.
Fanfold Media
You can load fanfold media through the rear access slot or through the bottom access slot.
Using the media supply hanger is optional.
Figure 16 • Rear Feed Using Media Supply Hanger