Brady X-Plus II - Manual (Page 84)

Configuration
Control Panel Parameters 74
14068L-001 Rev. A X-Plus II User Guide 1/11/07
Format Memory Card
This option erases all previously stored information from the optional
PCMCIA card or Compact Flash card.
Caution • This option completely erases the selected card.
To format a memory card:
1. Press the left oval to select A: or the right oval to select B: .
If your printer is set to require a password, you are prompted to enter
the password.
2. Enter the password. For instructions, see Change Password-Protected
Parameters on page 60 .
3. Press the appropriate button again to select the desired card.
The display shows ARE YOU SURE? .
4. Do you wish to continue?
• Press the left oval to select NO to cancel the request and return to
FORMAT CARD prompt.
• Press the right oval to select YES and begin initialization.
When initialization is complete, the printer automatically exits Setup
mode, and the control panel displays
PRINTER READY . If you exit
Setup mode while initialization is still in process, the control panel
display flashes between the phrases
CHECKING B: MEMORY and
PRINTER IDLE
.
Note • Depending on the amount of memory in the memory card,
initialization may take up to 5 minutes to complete.
Table 9 • Printer Parameters (Sheet 11 of 26)
Parameter Action/Explanation
FORMAT CARD:
A: B: