Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 18)

14 Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Chapter 4 Quick Start
Change a parameter value by first pressing the SEL key and then modifying the
selected value.
Pressing the Enter key will write the new value to the selected device. When a
parameter value is selected, pressing the ESC key will deselect the parameter
value and allow movement within the parameter list or group.
Bit-enumerated parameters are displayed and modified as follows:
Pressing the Enter key will write the new value to the selected device. When a
parameter value is selected, pressing the ESC key will deselect the parameter
value and allow movement within the parameter list or group. Pressing the ESC
key will delete changes and revert to the previous settings for that parameter.
1) Press the SEL key to
select the value
2) The Increment and Decrement keys increment or decrement the value
when it is selected. An edit box will appear when a key is pressed.
OR
Enter a number from the numeric keypad. An edit box will appear when a
key is pressed.
1) Press the SEL key to select a bit to
change.The selected bit name is
displayed here
Press < (scroll left) or > (scroll right) to select the next
bit
2) Press the Increment (or 0) or Decrement (or 1) key or to toggle the bit value