Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 82)

78 Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Chapter 18 Copy and Paste Feature
Screen and select the parameter to copy. Press the Shift key and then the Copy
key to copy all the parameter data to the clip board.
To paste the data to the Graph Setup Menu, invoke the Graph Setup Screen.
Next, press the Shift key and then press the Paste key to paste all the parameter
data to the GraphSetup Screen. The screen should appear something like this,
depending on the parameter copied:
The follow table documents which menus support the copy and/or paste feature:
SCREEN COPY Support PASTE Support
Parameter YES NO
CIA Editor YES YES
Graph Setup YES YES
Error Log YES NO
AutoDisplay Setup YES YES
Function Key Setup YES YES
Displayed for one second at the time of
the copying. This indicates the copy is
complete.
“Paste” is displayed
here for 1 second at the
time of the paste. The
display disappears
when the paste is
complete.
Class, Instance,
Attribute, Min and Max
value should change to
the settings of the
copied parameter