Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual - Manual (Page 59)

Rockwell Automation Publication 193-UM009B-EN-P - February 2013 55
Chapter
13
Discrete I/O Status
Discrete I/O Status The Discrete I/O Status screen is displayed by selecting I/O Stat and pressing the
Enter
key at the Advanced Functions Menu. This screen displays the status of any
Discrete Input Points (DIP’s), Discrete Output Points (DOPs) and Produced
Network Bits (PNBs) that are implemented in the currently selected device. This
screen will be available if any one of the DIPs, DOPs or PNBs are supported in
the currently selected device.
Note : In this example the device supports 4 instances of the Discrete Input Point
Object.
The type of bits that
are selected and are
being displayed. Press
the Sel key to select a
different bit type
Unused bits
Value of each
bit, 1 or 0
Range of bits
displayed on this line