Manual objectives, Who should use this manual, Vocabulary – Rockwell Automation 193-DNCT DeviceNet Configuration Terminal User Manual User Manual
Page 4: Reference manuals
iv
Rockwell Automation Publication 193-UM009B-EN-P - February 2013
Manual Objectives
The purpose of this manual is to provide you with the information necessary to apply the DeviceNet™ Configuration
Terminal. Described in this manual are methods for installing, configuring, and troubleshooting the DeviceNet™
Configuration Terminal.
Who Should Use This Manual
This manual is intended for qualified personnel responsible for setting up and servicing DeviceNet™ devices. You must have
previous experience with and a basic understanding of communications terminology, configuration procedures, required
equipment, and safety precautions.
You should understand DeviceNet™ network operations, including how devices operate on the network.
Vocabulary
In this manual we refer to the:
Bulletin 193 DeviceNet™ Configuration Terminal as 193-DNCT, DNCT, terminal, Configuration Terminal, or HIM
(Human Interface Module)
Programmable Logic Controller as a Programmable Controller, PLC controller, SLC controller, ControlLogix Controller,
or PLC
DeviceNet™ as DNet or DNET
Reference Manuals
DeviceNet™ Media Design and Installation Guide
•
Publication DNET-UM072_-EN-P
http://www.rockwellautomation.com/literature/
.
IMPORTANT
Read this manual in its entirety before installing, operating, servicing, or initializing the DeviceNet™
Configuration Terminal.
IMPORTANT
Read the DeviceNet™ Media Design and Installation Guide (Publication DNET-UM072_-EN-P)
in its entirety before planning and installing a DeviceNet™ system. If the network is not installed
according to this document, unexpected operation and intermittent failures may occur.